Before decoration, we should first choose the office glass partition decoration company to plan and design our own office space. In the design process, we should consider many factors involved in office decoration, because office decoration project is a diversified construction process, involving many conventional important projects in office decoration. Different office decoration projects often play a decisive role in office decoration. Here, several common office partition decoration projects in Jinan are listed as follows:

一、消防工程

1、 Fire engineering

大部分辦公室裝修都要隔斷。如果隔斷到頂，需要換煙霧傳感器，物業公司一般會要求業主或者裝修公司自行，如果這樣的話就要找有那些有資質的消防公司，消防公司按照規定還要報批當地消防局進行審批，這個時間通常要7~10天，另外在報批消防局是有一定費用的。

Most office decoration should be separated. If the partition reaches the top and the smoke sensor needs to be replaced, the property company will generally require the owner or decoration company to solve it by themselves. In this case, it is necessary to find those qualified fire companies. The fire companies also need to report to the local fire department for approval according to the regulations. This time usually takes 7 ~ 10 days. In addition, there is a certain fee in the report to the fire department for approval.

二、留意空調

2、 Pay attention to air conditioning

同樣，辦公裝修中也需要劃分空間，所以需要考慮每個空間都要預留一定數量的空調出風口和回風出風口，所以也需要找有正規資質的空調安裝公司。這里，基于空調的考慮，還涉及到我們的辦公室隔斷墻是否做到頂，比如德魯克隔斷公司近期完工的江蘇造紙廠的工程中，就是由于考慮到空調，所以不能做到頂，不過，雖然隔斷墻沒有做到頂(按照消防要求，頂部空出300mm距離)，不過，空出的部分可以做格柵處理，美觀時尚。

Similarly, space division is also required in office decoration, so it is necessary to consider that a certain number of air conditioning outlets and return air outlets should be reserved in each space, so it is also necessary to find an air conditioning installation company with formal qualification. Here, based on the consideration of air conditioning, it also involves whether the partition wall of our office can be topped. For example, in the project of Jiangsu paper mill recently completed by Drucker partition company, it can not be topped because of the consideration of air conditioning. However, although the partition wall does not reach the top (300mm is left on the top according to the national fire control requirements), however, The spare part can be treated with grille, which is beautiful and fashionable.

三、強弱電

3、 Strong and weak current

這是辦公隔斷墻裝修工程中的要點，因為關系到整個公司的正常工作，不能忽視。由技術人員到現場進行實際測量，把強弱電的預留開關，插座以及各種線路走向全部體現規劃到圖紙上，然后交與物業公司審核。

This is the key point in the office partition wall decoration project, because it is related to the normal work of the whole company and can not be ignored. Technicians shall go to the site for actual measurement, reflect the reserved switches, sockets and various line directions of strong and weak current on the drawings, and then submit them to the property management company for review.

四、辦公家具

4、 Office furniture

因為大多數辦公室都需要辦公室玻璃隔斷，很多線路，插座都要與隔斷相連接的，所以家具公司一定要與電器工程師有個機密的銜接，圖紙好要先由這兩方共同確定好。

Because most offices need office glass partitions, and many lines and sockets must be connected with the partitions, the furniture company must have a confidential connection with the electrical engineer, and the drawings should be jointly determined by the two parties first.

安裝辦公室玻璃隔斷時，一定要注意每一個安裝細節，確保安裝正確、準確。同時，由于使用的型材容易劃傷皮膚，操作時也要注意人身，避免劃傷或其他傷害。

When installing the office glass partition, be sure to pay attention to each installation detail to ensure correct and accurate installation. At the same time, because the profile used is easy to scratch the skin, pay attention to personal safety during operation to avoid scratches or other injuries.