感應門非常方便，我們只要站在它面前，它就會自動開合，它的應用幾乎算是隨處可見，近期有很多朋友問，感應門它是怎么自動開關呢，是靠什么部件工作的呢？

　　Induction door is very convenient, as long as we stand in front of it, it will automatically open and close, its application is almost everywhere, there are a lot of friends recently asked, induction door it is how to automatically switch it, is relying on what parts work?

　　感應門的系統配置是指根據使用要求進行配置，通過與控制支重輪連接的周邊輔助控制裝置，例如開門的信號源、出入系統、集中控制等，根據建筑物的使用特征，通過人員的構成等合理配置輔助控制裝置。開門信號是接點信號，微波雷達和紅外傳感器是兩個常用的信號源。

　　The system configuration of the induction door refers to the configuration according to the requirements of use, through the peripheral auxiliary control devices connected with the control wheel, such as the signal source of the door, access system, centralized control, according to the characteristics of the use of the building, through the composition of personnel and other reasonable configuration of auxiliary control devices. The open door signal is a contact signal, microwave radar and infrared sensor are two commonly used signal sources.

　　微波雷達由于對物體的位移有反應，所以適合反應速度快、步行速度正常的人通過的場所，其特征是在門附近的人不想出門而靜止后，雷達沒有反應，感應門關閉，對門的機械有一定的保護作用。

　　Microwave radar has a reaction to the displacement of the object, so it is suitable for the place where people with fast reaction speed and normal walking speed pass through. Its characteristic is that when people near the door do not want to go out and remain still, the radar does not respond and the induction door is closed, which has a certain protective effect on the door machinery.

　　紅外線傳感器對物體的存在作出反應，不管人是否在動，只要在傳感器的掃描范圍內就會輸出接點信號。缺點是紅外線傳感器的反應速度慢，適用于行動遲緩的人進行出出進進的場所。

　　Infrared sensors respond to the presence of objects, regardless of whether a person is moving or not, as long as the sensor's scanning range will output a contact signal. The disadvantage is that the infrared sensor response speed is slow, suitable for slow people to carry out in and out of the place.

　　此外，如果接收接點信號的時間過長，則控制支重輪會認為信號輸入系統有故障。而且如果濟南感應門開放時間過長，將會對零配件造成損害。微波雷達和紅外線傳感器，因為不知道接近濟南感應門的人是否真的進門，也有想使用強制開關的情況。

　　In addition, if it takes too long to receive the contact signal, the control support wheel will assume that the signal input system is faulty. And if the opening time of ji 'nan induction door is too long, it will cause damage to spare parts. Microwave radar and infrared sensors, because I do not know whether people close to ji 'nan induction door really enter the door, but also want to use the forced switch.

　　濟南感應門就是依靠這些部件開關的，相信大家讀完這篇文章可以對感應門有一個更加深入的了解，以上內容介紹完了，后續大家想了解更多相關知識內容，可以持續關注我們www.9pop.cn。

　　Ji 'nan induction door is relying on these parts of the switch, I believe that after reading this article you can have a deeper understanding of the induction door, the above content is introduced, follow-up you want to know more about the relevant knowledge content, you can continue to pay attention to our www.9pop.cn.