Since the automatic induction door appeared in our field of vision, there have been many accidents and faults, such as human clamping. So what is the cause of the accident? In this regard, the editor of Jinan induction door summarized several pieces of information for your reference:

1、沒有設計安裝配件等措施，防止事故。

1. Safety measures such as safety accessories are not designed and installed to prevent safety accidents.

2、用戶方選用含性較低的產品，產品本身不具備防護和檢測功能

2. The user selects products with low safety, and the product itself does not have safety protection and detection functions

3、乙方安裝施工技術不精，工程施工粗糙。

3. Party B's installation and construction technology is not accurate, and the project construction is rough.

沒有安裝防護相關附件，我們為什么要談論產品質量？就像每個人都有一顆非常年輕的心臟，但是其他系統很容易在我們體內老化，所以就意味著我們身體出錯的概率。

Why should we talk about product quality without installing safety protection related accessories? Just like everyone has a very young heart, but other systems are easy to age in our body, so it means the probability of our body making mistakes.

玻璃感應門屬于自動機械設備。在正式使用中必須配備必要的防護措施，以確保行人通行。在實際應用中，主動式傳感器可以保證感應區域內行人的，但感應區域的盲區主要是門扇區域，無法識別和保護停留的行人或物體。

Glass sensing door belongs to automatic mechanical equipment. Necessary safety protection measures must be provided during formal use to ensure the safety of pedestrian passage. In practical application, the active sensor can ensure the safety of pedestrians in the sensing area, but the blind area of the sensing area is mainly the door leaf area, which can not identify and protect the stopped pedestrians or objects.

光線-主要通過發射、接收光眼和主控制器，實現各平移自動門（加粗）、電動伸縮門、自動卷簾門的和防夾（人或物）輔助功能。它能準確、可靠地檢測到人或物，并對自動門提供停止關閉和打開的門信號，從而避免自動門夾人的隱患。

Safety light - realize the safety and anti pinch (person or object) auxiliary functions of each translation automatic door (BOLD), electric telescopic door and automatic rolling shutter door mainly through transmitting and receiving light eyes and main controller. It can accurately and reliably detect people or objects, and provide door signals to stop closing and opening the automatic door, so as to avoid the potential safety hazard of automatic door clamping people.

光線的特點是發射和接收距離遠（可達10米）；光電眼裝配線方便靈活，易于觀察，調節量大；能有效克服感應傳感器的盲目性，使自動門更。自動門感應器

Safe light is characterized by long transmitting and receiving distance (up to 10 meters); The photoelectric eye assembly line is convenient and flexible, easy to observe and has a large amount of adjustment; It can effectively overcome the blindness of the induction sensor and make the automatic door safer. Automatic door sensor

光線的設計和安裝位置-在設計和安裝電動玻璃自動門的眼（燈）時，應考慮電眼的位置。一般情況下，電眼的設計感應固定在兩側門的外側，以免活動門扇的擺動影響電眼。兩側立柱尺寸較大，沖孔安裝位置容易選擇。如果是門框周圍的自動門，也可以在門框中間安裝一個固定垂直的門框，方便眼睛集中拍攝距離，但布線時要避免線路外露和門扇接觸。

Design and installation position of safety light - when designing and installing the safety eye (safety lamp) of electric glass automatic door, the position of the electric eye shall be considered. Generally, the safety eye is designed to be fixed on the outside of the doors on both sides to avoid the swing of the movable door leaf affecting the safety eye. The size of columns on both sides is large, and the punching installation position is easy to choose. If it is an automatic door around the door frame, a fixed vertical door frame can also be installed in the middle of the door frame to facilitate the eyes to focus on the shooting distance, but the wiring should avoid exposed lines and door leaf contact.

電眼應注意的事項——雖然電眼對自然光具有良好的抗干擾能力，但安裝時應避免陽光直射。

Precautions for electric eye - although the safety electric eye has good anti-interference ability to natural light, direct sunlight shall be avoided during installation.