The application of glass partition has brought business opportunities to the partition industry. At the same time, the form of partition is also overwhelming. How to choose glass partition? Let's introduce it to you. The selection of glass partition should be carried out according to the occasion. Let's have a look together!

玻璃隔斷是的隔墻材料。現代裝修利用了玻璃工藝，了色澤斕的裝飾，讓我們看1看市場上幾種典型的玻璃隔斷。玻璃隔斷可簡單分為單層玻璃隔斷(單玻隔斷)和雙層玻璃隔斷(雙玻隔斷。高隔間和活動隔斷。

Glass partition is a kind of partition material. Modern decoration uses glass technology and colorful decoration. Let's take a look at several typical glass partitions in the market. Glass partition can be simply divided into single glass partition (single glass partition) and double glass partition (double glass partition). High compartment and movable partition.

單玻玻璃隔斷即使單片玻璃做的隔斷，如5-1mm鋼化玻璃、彩釉玻璃、磨砂玻璃都可以，雙層玻璃隔斷為常見的是中空玻璃隔斷加百葉。隔音好，適合議室用。下面為大家介紹幾種常用的玻璃隔斷。

Single glass partition even if it is made of single glass, such as 5-1mm tempered glass, colored glazed glass and frosted glass, double-layer glass partition is common, which is hollow glass partition and louver. It has good sound insulation and is suitable for conference room. Here are several common glass partitions.

活動隔斷活分隔室內空間用的設施。活動隔斷可將大空間分隔成小空間，以建筑空間使用功能多樣化的需要。

The movable partition is a facility for separating indoor space. The movable partition can separate large space into small space to meet the needs of diversified use functions of architectural space.

拼裝式活動隔斷

Assembled movable partition

按使用要求可拆可裝的活動隔斷。由與房間頂棚同等或只有房間部分的輕質隔扇單元拼裝而成。隔扇單元通常厚6～12厘米，寬60～120厘米,由木材或薄壁金屬型材作框架,雙面貼膠合板、纖維板或紙面石膏板。

The movable partition can be disassembled and installed according to the use requirements. It is assembled by light partition unit which is the same as the room ceiling or only part of the room. The partition unit is usually 6 ~ 12cm thick and 60 ~ 120cm wide. It is made of wood or thin-walled metal profiles as the frame, and pasted with plywood, fiberboard or paper gypsum board on both sides.

有的還在填蜂窩紙以剛度，或填礦棉等以隔聲能力。與房間頂棚同等的隔斷的安裝法是：先在頂棚安置帶凹槽的上檻，將隔扇凹槽，并在每塊隔扇下面安置兩個墊塊或可調節的螺栓,在隔扇定位后,

Some are also filled with honeycomb paper for rigidity, or mineral wool for sound insulation. The installation method of partition equivalent to the room ceiling is: first place the upper sill with groove on the ceiling, groove the partition fan, and place two cushion blocks or adjustable bolts under each partition fan. After the partition fan is positioned,

用踢腳板壓蓋下部的縫隙。這種隔扇用于較長時間才變空間分隔的住宅和學校等。只有房間部分的矮隔斷用矮隔扇裝成。先將矮隔扇安裝在能自立于地面的立柱上，

Cover the gap at the lower part with skirting board. This kind of partition fan is used for houses and schools that change space separation for a long time. Only the low partition of the room is installed with low partition fan. First, install the low partition fan on the column that can stand on the ground,

也可用螺栓或鉸鏈將幾片矮隔扇連成角度，或連成可折疊的屏風的形式。視需要而定，如用于擋住站立者的視線。

Bolts or hinges can also be used to connect several low partition fans at an angle, or in the form of foldable screens. It can be used as needed, such as to block the sight of standing people.