肯德基門靠其時髦的外觀、防塵防噪、鞏固耐用等優勢征服了很多客戶。裝置濟南肯德基門需求留意一些小細節。

KFC door has conquered many customers by virtue of its fashionable appearance, dust-proof and noise proof, solid and durable. The installation of Jinan KFC gate requires attention to some small details.

1、裝置次序。裝置肯德基門時，次序不能亂，避免呈現裝好在拆的狀況。

1. Device sequence. When installing KFC doors, the order should not be disordered, so as to avoid the situation of being installed and being disassembled.

2、玻璃密封條。裝玻璃密封條時，應該留有彈性余量，避免裝置時呈現問題。

2. Glass sealing strip. When installing the glass sealing strip, there should be elastic allowance to avoid problems during installation.

3、門的地軸要固定好。門的地軸固定好后，為了保證鞏固度，有必要要等水泥干了今后再進行下一步。

3. The floor shaft of the door should be fixed. After the floor shaft of the door is fixed, it is necessary to wait for the cement to dry before proceeding to the next step in order to ensure the consolidation.

4、門的整理。肯德基門裝置完結今后，為了避免劃傷門以及灰漿污物等粘附在肯德基門外表，整理的東西要留意，使用專門的溶劑、棉紗清洗。還有不要讓門洞或門縫里留不應留的東西。

4. Arrangement of doors. After the KFC door installation is completed, in order to avoid scratching the door and mortar dirt adhering to the KFC door surface, pay attention to the things sorted out, and use special solvents and cotton yarn to clean them. And don't leave anything that shouldn't be left in the door hole or crack.

5、抹潤滑油。裝門前，地軸上抹一點潤滑油能夠讓門扇開合自如，然后添加運用壽命。

5. Apply lubricating oil. Before installing the door, a little lubricating oil on the floor shaft can make the door leaf open and close freely, and then add service life.

6、螺絲要擰緊。肯德基門裝置時螺絲要千萬要擰緊，不然門會松動。

6. The screws should be tightened. When installing the KFC door, the screws must be tightened, otherwise the door will become loose.

注意：

be careful:

要做好核對和檢查工作，核對型號、規格、數量是否符合要求；拼樘構件、五金零件、安裝鐵腳和緊固零件的品種、規格、數量是否正確和齊全。

Check and check whether the model, specification and quantity meet the requirements; Whether the variety, specification and quantity of splicing components, hardware parts, mounting iron feet and fastening parts are correct and complete.

安裝彰，應逐樘確認完好，如門窗框變形，或窗角、窗梃、窗心有脫焊、松動等現象，需要行修復再安裝。

If the door and window frames are deformed, or the window corners, mullions and cores are desoldered or loose, repair them before installation.

核對圖紙要求的門窗洞口上彈出水平、垂直控制線是否畫好。保證肯德基門在安裝過程中的位置、尺寸、標高準確無誤。

Check whether the horizontal and vertical control lines snapped on the door and window openings required by the drawings are well drawn. Ensure that the position, size and elevation of KFC door during installation are correct.

肯德基門盡量不使用吊起的方式，如需吊起運輸需要平穩牢固的著力點，在落的時候也需要特別注意。切記不可使用棍棒等工具穿入窗心或窗梃起或杠抬，更不能使用拋、摔等危險的方式。關注我們http://www.9pop.cn，了解更多！

KFC doors should not be hoisted as far as possible. If they need to be hoisted, they need stable and firm points of strength, and they also need special attention when falling. Remember not to use sticks and other tools to penetrate into the window core or stiles or lift them with bars, and not to use dangerous methods such as throwing and falling. Follow us http://www.9pop.cn Yes, learn more!